S2 Glass Pen Stand

S2 Glass Pen Stand

€79,00 EUR
Skip to product information
S2 Glass Pen Stand
S2 Glass Pen Stand

S2 Glass Pen Stand

€79,00 EUR

A stand designed for the glass pen.

The S2 stand is designed to accompany the use of a glass pen during short breaks while drawing or writing. More slender and sculptural, it showcases the pen on the desk while retaining the anti-drying function that allows an immediate return to the gesture.

◉

Anti-drying

Tip immersion

✦

Short break

Occasional use

Each S2 stand is entirely handmade in transparent blown glass. Its more elongated shape, angle and thickness may vary slightly, reflecting its artisanal production.

Designed from real use.

The S2 stand was designed from the practical use of the glass pen. When a pen loaded with ink is left exposed to air, the ink quickly dries inside the capillary grooves of the tip.

The stand includes a reservoir designed to hold a shallow layer of water, approximately 5 mm. By immersing only the tip, the water slows the drying of the ink and acts as a retarder, without completely blocking the flow.

Under these conditions, a pen loaded with ink will gradually release its ink into the water after 20 to 30 minutes. The stand is therefore particularly suited to short breaks, from one to a few minutes. For longer breaks, it is recommended either to clean the pen or to leave it immersed to prevent drying.

The S2 stand is a comfort tool designed to preserve the continuity of the gesture while giving the pen a more visible presence when not in use.

Compatibility

Compatible with all Requin Renard glass pens.
Not compatible with pens from other brands.

Use

Designed for use with water only.
Recommended water level: approximately 5 mm.

Care

Clean with warm or hot water.
Dishwasher safe.

Production

Handmade in small batches.

Pour approximately 5 mm of water into the reservoir. Place the ink-loaded nib so that only the tip is immersed. The water slows drying and allows work to resume without cleaning.

The stand is designed for short breaks, from one to a few minutes. After 20 to 30 minutes, the nib gradually releases ink into the water. For longer breaks, clean the nib or leave it fully immersed.

Immersion slows the flow without stopping it completely. The water acts as a retarder, preventing drying while allowing ink to descend slowly by gravity.

Empty the colored water and rinse with clean water. For deeper cleaning, use warm or hot water. The stand is dishwasher safe.

Use

Pour approximately 5 mm of water into the reservoir

Place the loaded nib with the tip immersed

Remove and resume work without cleaning

Designed for breaks of a few minutes

Compatibility

Compatible with all Requin Renard nibs

Not compatible with nibs from other brands

The stand shape is adapted to our nibs

Maintenance

Empty and rinse after each work session

Warm or hot water for ink residue

Dishwasher safe

Blown glass is resistant to repeated use